|
|
|
|
 |
|
KEY
A Aux, Marker
H Headlamp
H1 High Beam Headlamp
H2 Low Beam Headlamp
T Taillights
P Park lights or Aux |
|
G-7178 |
$23.43 |
OFF-T/A-H/T
• 3.78 ohms rheostat dimmer for panel lights
• 30 Amp circuit breaker
• Panel Lights can be adjusted in both "On"
positions.
• Plated steel case
• Screw terminals
• Mounting stem 3/8" - 24 thread |
|
G-7157 |
$12.33 |
OFF-T/P-H/T
• Silver Contacts
• Screw terminals
• 30 Amp Circuit Breaker |
|
G-7127 |
$9.29 |
OFF-T/P-H/T
• 20 Amp fuse
• Plated steel case
• Screw terminals
• Mounting stem 7/16" - 28 thread |
|
G-7112 |
$10.74 |
OFF-T/P-H2/T-H1/T
4 Position Switch
• Plated steel housing
• Screw terminals
• Mounting stem 3/8" - 24 thread |
|
G-71042 |
$19.36 |
OFF-T/A-H/T
• 7.0 ohms rheostat dimmer for panel lights
• Tan knob "Lights" imprint |
|
G-71016 |
$22.81 |
• Universal 12 volt replacement for many General Motors
Vehicles
• Replaces: GM1995060, Mack 1MR-399-P1
• Trucks: Mack (with 12 Volts systems) 55-59 |
|
G-72099 |
$12.93 |
OFF-T/P-H/T
• Plated die-cast housing
• Screw terminals
• Silver contacts
• Mounting stem 7/16" - 28 thread |
|
 |
|
|
G-7762 |
$4.60 |
• Mounting Holes 9/32" dia., 1 3/4" on centers
• Replaces: A.M.C. 931201; Motorcraft SW-259; Delco 1997028,
31, 37, 40, 43, D-803, D-804, D-808, D-810, G.M. 538446, 578005
• Uses No. G-30155 Connector |
|
G-7769 |
$9.19 |
• Three 1/4" - 20 tapped holes, 3/4" and 1
3/4" on centers
• Mounting stem: 27/32" dia.
• Replaces: Delco 1997008, 1997009, 1997014, D-805, U-802 |
|
 |
|
|
G-74601-02 |
$33.11 |
• Four amp capacity (for lighting control
only)
• Mounting stem: 7/16"-28 thread, .45"
long.
• Case 1 5/8" round, 1" long
• Three wire Packard connector #2984378 on 3" leads |
|
G-74601-01 |
$27.93 |
• Same as G-74601-02 except except 7 amp
capacity
• Only 2 wires |
|
G-7493 |
$10.79 |
• For 12V(DC) electrical systems
• Ceramic insulator with imbedded coil
• Effective heat dissipation
• Black plastic knob with metal insert and set screw
• Two screw terminals |
|
G-7496 |
$10.06 |
|
• Same as G-7493 except except with blade
terminals |
|
|
|
|
